2/4 Welder Rd,
Seven Hills NSW 2147

Call Us Today!

02 9674 2500

Menu Close

Domus
Window
Awnings

Window awnings are the perfect attachment for covering windows,doors to prevent weather penetration. Most of our window awnings comply with BASIX (please note clear, bronze sheet polycarbonate awnings DO NOT). With a wide array of shapes to choose from, we cover different styles using our unique hinge beam weather bar systems.

All our awnings come with installation guides and are sold throughout Australia through our vast network of resellers. Awnings can be mounted from fascia or wall. All we need to know is arm length.

Handy men/women can install these awnings as they are already fabricated. The rear weather bar and arms are the only thing needing installing on site.

Please look at the individual shapes of our window awning range.

Domus window awnings offer the traditional, yet modern look. The window awning system allows the awnings to be set at any angle. The rear-receiving channel is affixed and the awning simply clicks in and fastens. You can set the awning to any pitch to suit your needs. The awnings come in the projections of 960mm, 1160mm, 1450mm and 1600mm.

If you need an awning greater than this, you will need to go to a patio cover.

The joining bars are curved to suit our minimum radius of 1400mm. 8mm polycarbonate sheets cannot curve tighter than this. This does restrict the ability to achieve that tight cafe style look, however this is usually only applicable to the small projected awnings.

The awnings come in a variety of colour choices where you can mix and match. There are five (5) sheet choices of 8mm twin walled polycarbonate and four (4) aluminium joining bar colours. However, for an extra charge, we are able to powder coat to any specific colour of your choice.

Each polycarbonate sheet with the H Bar is 725mm centre to centre. So two (2) sheets start at 1500mm wide and then simply add 725mm for each panel to determine the width you need. The sheets are UV protected on both sides for greater protection. All awnings can be made to exact size to suit your needs.

The arm attachment is a simple bracket system. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The arms can be cut to any size on site to determine your pitch. Please see Tech Info for our installation guides.

For further information, please contact the office on (02) 9674 2500 and ask for sales.